A.1.8—Projectile components
- Syllabus
- First assessment 2025
- Objective
- —
- Level
- SL
Separate the axes
With negligible fluid resistance, projectile motion is independent horizontal and vertical motion. Resolve the launch velocity:
ux=ucosθ,uy=usinθ
Horizontal motion
There is no horizontal acceleration in the ideal model, so vx=ux and x=uxt. Use the horizontal displacement to find time or horizontal speed.
Vertical motion
Use one-dimensional constant-acceleration equations vertically, usually with ay=−g if upward is positive. The horizontal and vertical equations share the same time t.
Worked example from local Question Bank row 31723
A tennis ball travels 11.9m horizontally after launch at 64.0ms−1 and 7∘ to the horizontal.
ux=64.0cos7∘=63.52ms−1
t=uxx=63.5211.9=0.187s
The same 0.187s must then be used in the vertical equation.
Common trap
Do not use the launch speed as the horizontal speed. Resolve it first, and do not use the horizontal time independently of the vertical motion.
The evidence uses launch angle and horizontal distance to determine time or initial speed, rewarding the correct trigonometric component and the shared-time model.
Calculate / Show
Resolve the launch velocity into horizontal and vertical components before using equations. Use the common time for both axes; calculate horizontal time from x=u_xt when horizontal acceleration is zero, then check the vertical condition separately.
Using u sin θ for horizontal motion or forgetting that the vertical and horizontal calculations refer to the same elapsed time.
Representative question
The ball leaves the ground at an angle of 22∘. The horizontal distance from the initial position of the edge of the ball to the wall is 11 m . Calculate the time taken for the ball to reach the wall.
horizontal speed =19×cos22 « =17.6 m s−1 »
time =≪ speed distance =19cos2211=>0.62<s≫
Marking guidance:
Allow ECF for MP2