D.2 Electric and magnetic fields

Draw the interaction

For two like point charges, draw arrows away from each other. For two unlike point charges, draw arrows toward each other. The direction is determined by the sign combination; the force magnitude also depends on charge magnitudes and separation, which Coulomb’s law quantifies.

Extend to a third charge

If a third charge is present, find the force from each other charge separately and add the force vectors. Do not decide the net direction by charge sign alone: compare the individual vectors and their magnitudes.

Worked example — unlike charges in air

For $q_1=4.5\times10^{-8}\,\mathrm{C}$, $q_2=-1.3\times10^{-7}\,\mathrm{C}$ and $r=3.2\times10^{-2}\,\mathrm{m}$, $F=(8.99\times10^9)|q_1q_2|/r^2=5.1\times10^{-2}\,\mathrm{N}$. The force is attractive because the charges have opposite signs.

Read the scaling

Doubling either charge doubles the force. Doubling the separation reduces the force to one quarter. If the medium has permittivity $\varepsilon$ rather than $\varepsilon_0$, use $k=1/(4\pi\varepsilon)$; greater permittivity reduces the force for the same charges and separation.

Choose the point-charge model

Spherical charged bodies can be treated as point charges at their centres when the geometry permits. Use centre-to-centre separation and convert charge units, such as microcoulombs, before substitution. For several charges, calculate each force vector and add them.

Use it at a junction

In a steady circuit, charge does not accumulate at a junction. The current entering equals the current leaving, for example $I_1=I_2+I_3$. This is a consequence of charge conservation, not a separate rule that overrides it.

Track the system boundary

When charge appears to change on one object, include the other object, the conductor or the ground in the system. Electrons may move across the chosen boundary, so the object’s charge changes while the total charge of the larger isolated system remains constant.

Read the evidence

Repeating the measurement for many drops gives charges that are integer multiples of a smallest value, the elementary charge $e$: $q=ne$, where $n$ is an integer. This pattern is evidence that electric charge is quantized rather than continuously variable.

Explain the method

The experiment varies the electric field until a drop is held stationary, then uses the known mass and field to infer its charge. It is the repeated integer-multiple pattern—not one isolated drop—that supports the quantization conclusion.

Transfer by induction

Bring a charged object near a conductor without touching it. Charges in the conductor separate by repulsion and attraction. If the conductor is connected to ground while the charged object remains nearby, electrons can flow to or from Earth. Disconnect the ground first, then remove the external charged object, leaving the conductor with a net charge.

Transfer by contact and grounding

Touching a charged conductor to another conductor allows charge to redistribute between them. Grounding connects an object to a very large charge reservoir: electrons can leave an object or enter it, depending on the nearby charge and the object’s potential.

Worked example — point-charge field

At $r=1.0\,\mathrm{m}$ from $Q=+2.9\times10^{-8}\,\mathrm{C}$, $E=(8.99\times10^9)(2.9\times10^{-8})/(1.0)^2=2.6\times10^2\,\mathrm{N\,C^{-1}}$. Because the source is positive, the field points radially outward.

Add fields as vectors

For more than one source, calculate each electric-field vector at the point and add them. Do not add magnitudes unless all field vectors point in the same direction. The force on a particular charge is then $F=qE$, with its direction reversed from the field if the charge itself is negative.

Read qualitative strength

Where field lines are closer together, the field is stronger; where they spread out, it is weaker. This is a qualitative representation unless the diagram specifies equal field-line intervals or a scale.

Connect density to distance

Around an isolated point charge, field lines spread as distance increases, so the field becomes weaker. A denser pattern near the charge is consistent with the inverse-square dependence of field strength. In a uniform field, equal spacing indicates constant field strength.

Check the representation

Density comparisons are meaningful only when the diagram uses the same line convention and potential/field intervals. Do not infer exact numerical values from arbitrary artwork; use labels or a scale if a calculation is required.

Worked example — required potential difference

For $E=1.0\times10^6\,\mathrm{V\,m^{-1}}$ and $d=0.50\,\mathrm{cm}=5.0\times10^{-3}\,\mathrm{m}$, $V=Ed=(1.0\times10^6)(5.0\times10^{-3})=5.0\times10^3\,\mathrm{V}$. The result applies to the uniform central region.

Read the direction

Electric field lines point from the positive plate to the negative plate, so a positive charge accelerates in that direction and a negative charge accelerates oppositely. The field strength can be expressed in $\mathrm{N\,C^{-1}}$ or equivalently $\mathrm{V\,m^{-1}}$.

Check the boundary

The formula assumes a uniform region and neglects edge effects. Use the perpendicular plate separation in metres; do not use the diagonal distance or the plate length.

Use the right-hand rule

Around a long straight current-carrying wire, the field lines are concentric circles centred on the wire. Point the right thumb in the conventional current direction; curled fingers give the magnetic-field direction. If electrons move into the page, conventional current is out of the page, so reverse the electron-motion direction before applying the rule.