4.5 - Nuclear and Particle Physics A2
- Syllabus
- 2021
- Topic
- 4.5
- Level
- A2
A nucleus is described by its nucleon number A and proton number Z. The nucleon number, also called mass number, counts all protons and neutrons. The proton number, also called atomic number, counts protons and fixes the element's identity.
| Nuclear notation | Meaning |
|---|---|
| ZAX | nuclide of element X |
| protons | Z |
| neutrons | A−Z |
| nucleons | A |
For 51121Sb, the nucleus contains 51 protons and 121−51=70 neutrons. An ion of this nuclide still has the same A and Z because gaining or losing electrons does not alter its nucleus.
Do not treat A as the relative atomic mass shown in a periodic table: A is a whole-number count for one nuclide. Isotopes have the same Z but different A because their neutron numbers differ.
Rutherford scattering tested the diffuse positive-charge ('plum pudding') model by directing alpha particles at thin metal foil. The observations did not fit diffuse charge, so the atomic model changed to one with a tiny central nucleus.
| Observation | Inference |
|---|---|
| most alpha particles passed straight through | most of the atom is empty space |
| some were deflected through small angles | positive charge is concentrated, repelling positive alpha particles |
| very few reversed or scattered through large angles | most mass and positive charge occupy a very small nucleus |
A large deflection requires a large force acting for a short time. This occurs only when an alpha particle passes very close to a concentrated positive charge. The rarity of these events shows that the nuclear region is tiny compared with the atom.
The experiment did not show alpha particles colliding with a solid nucleus like balls. Their paths curve through electrostatic repulsion, and each conclusion must be tied to the frequency and angle of an observed scattering event.
Heating a metal cathode gives some conduction electrons enough energy to escape its surface: this is thermionic emission. A positively biased anode then attracts the emitted electrons, so the electric field transfers energy and increases their speed.
Across potential difference V, an electron gains kinetic energy of magnitude eV when other energy changes are negligible. Electric force is opposite to electric-field direction because the electron is negatively charged.
A magnetic field exerts a force perpendicular to the electron's velocity and the field. It changes the direction of velocity, producing acceleration and a curved path, but it does no work and cannot by itself increase the electron's speed.
Heating releases electrons; it does not accelerate an organised beam across the tube. Keep the roles distinct: an electric field can change speed and direction, whereas a magnetic field changes direction only.
| System | Electric-field role | Magnetic-field or detector role |
|---|---|---|
| linac | alternating p.d. accelerates a charge across successive gaps | steering/focusing may guide the beam; drift tubes shield particles during field reversal |
| cyclotron | alternating p.d. accelerates at each gap crossing | uniform perpendicular B bends the particle into semicircles |
| detector | charged particles ionise matter, producing charge or light signals | track deflection reveals charge sign and, with other data, momentum |
In a cyclotron, speed and momentum increase at every gap crossing, so r=p/(B∣Q∣) increases and the path spirals outward. The magnetic force supplies centripetal acceleration without adding energy.
In a linac, drift-tube lengths increase as a non-relativistic particle speeds up, allowing it to reach each next gap when the electric field again points in the accelerating direction.
A magnetic field is a steering field, not an energy source. Detector coverage here is limited to general ionisation and deflection principles; a visible track is evidence produced by interactions with detector material, not the particle itself.
For motion perpendicular to a uniform magnetic field, magnetic force supplies centripetal force. Using B∣Q∣v=pv/r gives r=p/(B∣Q∣). At non-relativistic speed, p=mv, so r=mv/(B∣Q∣).
| Change with other quantities fixed | Effect on radius |
|---|---|
| larger momentum p | larger r |
| stronger flux density B | smaller r |
| larger charge magnitude ∣Q∣ | smaller r |
| reverse charge sign | curvature reverses, radius magnitude unchanged |
An electron with p=1.50×10−24kgms−1 in B=48μT has r=p/(Be)=0.195m. Convert microtesla to tesla before substitution.
This circular-radius equation requires velocity perpendicular to a uniform field. If velocity has a component parallel to the field, that component is unchanged and the path is helical; use charge magnitude for r and charge sign only for curvature direction.
At an isolated particle interaction, total electric charge, total energy and total momentum before the vertex equal their totals after it. Momentum is a vector, so balance components rather than adding track momenta as unsigned numbers.
| Track evidence in a known magnetic field | What it can show |
|---|---|
| opposite curvature | opposite charge signs |
| larger radius for equal ∣Q∣ and B | larger momentum |
| tracks meeting or separating at a vertex | candidate interaction point |
| missing momentum | an unseen neutral particle or incomplete measurement may be involved |
Choose two perpendicular axes through the vertex. Resolve every known momentum, apply ∑px and ∑py conservation separately, then reconstruct the missing magnitude and direction. Check charge and total energy independently.
A curved track does not prove that energy is being lost because magnetic force itself does no work. Curvature alone gives p/∣Q∣; particle identity needs charge sign plus further evidence, and a proposed event must satisfy all three conservation laws.
To investigate a nucleon's internal structure, the probe must interact on a distance scale smaller than the nucleon. Increasing particle momentum shortens its de Broglie wavelength, so higher-energy beams can resolve finer structure in scattering patterns.
High collision energy can also produce new massive particles through mass-energy conversion. Colliding two equal, opposite beams gives nearly zero total momentum, so less of the available energy must remain as kinetic energy of the products than when a beam hits a stationary target.
Deviations from scattering expected for a structureless target reveal constituent behaviour. The beam energy is therefore selected to make the wavelength small enough and, where relevant, to exceed the energy needed to create detectable products.
High energy does not magnify a nucleon optically. It improves spatial resolution through shorter wavelength and makes otherwise inaccessible interactions possible; higher energy alone is not evidence of a particular internal model.
Mass-energy equivalence connects a change in system mass with an energy change: ΔE=c2Δm. In particle creation, supplied energy becomes rest energy and usually kinetic energy; in annihilation, particle and antiparticle rest energy becomes radiation and kinetic energy of other products.
Compare the complete initial and final systems. The minimum energy to create particles is their total rest energy, but momentum conservation may require additional kinetic energy. For annihilation of an electron and positron initially at rest, two photons can carry equal and opposite momentum.
Each electron has rest energy mc2≈0.511MeV. Electron-positron annihilation from rest releases 1.022MeV in total, shared by two photons of 0.511MeV moving in opposite directions.
Do not insert an ordinary mass difference without defining initial and final states. Energy and momentum are both conserved: a single free photon cannot create an electron-positron pair in empty space while satisfying momentum conservation.
| Quantity | Conversion |
|---|---|
| 1eV | 1.602×10−19J |
| 1MeV | 106eV |
| 1GeV | 109eV=103MeV |
| mass MMeV/c2 | rest energy is MMeV |
Convert energy by multiplying the number of electronvolts by 1.602×10−19J/eV. Thus 2.0GeV=2.0×109×1.602×10−19=3.2×10−10J.
To convert 938MeV/c2 to kilograms, first convert 938MeV to joules, then divide by c2, giving about 1.67×10−27kg. The notation /c2 belongs to a mass unit, not an energy unit.
MeV and GeV measure energy; MeV/c2 and GeV/c2 measure mass. Keep powers of 106 and 109 explicit, and do not multiply an energy by c2 when converting it to its equivalent mass.
An unstable particle moving at a speed close to c has a longer measured lifetime in the laboratory frame than its proper lifetime measured in its own rest frame. The effect becomes significant only at relativistic speeds.
Muons formed high in the atmosphere have a proper mean lifetime of about 2.2μs. Even at nearly c, a non-relativistic estimate gives only about 660m travelled in that time, yet many are detected after travelling several kilometres. Their increased laboratory lifetime explains the observation.
Compare the journey time or observed travel distance with what the proper lifetime would allow. If the speed is a substantial fraction of c and the observed survival is much greater, relativistic lifetime increase cannot be neglected.
The syllabus requires recognising and explaining significant situations, not using relativistic lifetime equations. The particle does not experience its own clock running slowly; different inertial frames measure different elapsed times between the relevant events.
| Class | Structure | Examples |
|---|---|---|
| baryon | three quarks | proton, neutron |
| meson | one quark and one antiquark | pions |
| lepton | fundamental; not made of quarks | electron, neutrino, muon |
| photon | fundamental interaction particle | electromagnetic radiation quantum |
Baryons and mesons are hadrons because they are made of quarks. Quarks and leptons are treated as fundamental in this model. A proton or neutron is therefore not fundamental even though it is a subatomic particle.
The pattern of quarks in the model contains paired members. Completing that symmetry led physicists to predict a top quark before it was observed; later experimental detection supported the classification.
Do not classify every three-particle collection as a baryon: the constituents must be quarks. A meson is not three quarks, and an electron or neutrino is a lepton rather than a hadron.
Every particle has a corresponding antiparticle with the same rest mass but opposite electric charge and opposite additive quantum numbers such as baryon number and lepton number. The antiparticle is written with a bar or a distinct symbol, for example e+ for the electron's antiparticle.
| Particle | Antiparticle | Charge change |
|---|---|---|
| electron e− | positron e+ | −e to +e |
| proton p | antiproton pˉ | +e to −e |
| neutrino ν | antineutrino νˉ | both neutral; lepton number reverses |
To deduce antiparticle properties, retain rest mass and reverse charge, baryon number and lepton number. A particle-antiparticle pair can annihilate, provided the products conserve total energy, momentum and all required quantum numbers.
Neutral does not automatically mean 'its own antiparticle': a neutrino and antineutrino are distinguished by lepton number. Conversely, some neutral particles such as the photon are their own antiparticles.
An allowed particle interaction must conserve electric charge Q, baryon number B and lepton number L. Assign each incoming particle's values, total each column, and compare with the totals for all outgoing particles.
| Particle type | B | L |
|---|---|---|
| baryon / antibaryon | +1 / −1 | 0 |
| lepton / antilepton | 0 | +1 / −1 |
| meson or photon | 0 | 0 |
| quark / antiquark | +1/3 / −1/3 | 0 |
For beta-minus decay n→p+e−+νˉe: charge gives 0=(+1)+(−1)+0; baryon number gives 1=1+0+0; lepton number gives 0=0+(+1)+(−1). All three ledgers balance.
Conserving charge alone is not enough. Count antiparticles with negative baryon or lepton number, include every product, and keep lepton number separate from electric charge; energy and momentum must also be conserved even when this particular test focuses on Q, B and L.
A particle equation lists every incoming particle to the left of an arrow and every product to the right. Read each supplied symbol first, then use conservation laws to identify a missing symbol or test the completed equation.
| Step | Check |
|---|---|
| 1 | translate each symbol, including bars, charge signs and neutrino flavour |
| 2 | total electric charge on both sides |
| 3 | total baryon and lepton numbers on both sides |
| 4 | confirm energy and vector momentum can also balance |
The decay π+→μ++νμ has charge +1=(+1)+0, baryon number 0=0+0, and lepton number 0=(−1)+(+1). The antimuon is an antilepton, while the muon neutrino is a lepton.
A bar is not decoration: it changes particle identity and additive quantum numbers. Do not balance particle equations by changing coefficients as if they were chemical equations; the supplied event must represent one interaction with every conserved total unchanged.